VASCM: Endpost Tags

[Robert F. Hartmann]

Ed,

Thanks for this input. I ordered tags for my vineyard to tag the end posts.
There are 79 rows. Each has the Row Number, a "irrigation zone letter" and
the clone and rootstock. It took about an hour to enter the information and
a couple of phone calls. Very helpful people. I received the tags and they
were exactly as I had ordered. Total cost was $115.

Bob Hartmann
On Sun, Aug 14, 2011 at 10:42 PM, Ed Muns <ed at munsvineyard.com> wrote:

> One source of custom plastic tags for wooden endposts is
> www.eartagsdirect.com.  The round tag (Perma-Flex Orchard Tag Custom ...
> http://www.eartagsdirect.com/other-tags/perma-flex-orchard-tag-custom.html
> )
> is attached using two #4 screws, 1/2" or longer work fine.  10 colors are
> available.  Any number range can be ordered.  In addition to the large
> number printed on the tag, there can be smaller lines of text above and
> below the number.  These might be used to denote the vineyard block and/or
> the variety clone/rootstock or any other information desired.
>
> Regards,
> Ed
> ------------------------------------------------------------------
> Ed Muns
> Muns Vineyard - www.munsvineyard.com
> Facebook - www.facebook.com/munsvineyard
>
> _______________________________________________
> VASCM mailing list (http://www.kkn.net/mailman/listinfo/vascm)
> Post to: vascm at kkn.net
> Manage your subscription at: http://www.kkn.net/mailman/options/vascm
> Archives at: http://www.kkn.net/mailman/private/vascm/
>