[ARDF] TRO 2M AM Frequency

[Jay Hennigan]

Freyra at aol.com wrote:
> Frequency Question.  The five 2M AM TRO transmitters that were are  providing 
> for the 
> Championships are currently set to 145.020 MHZ.  We  had to move from 145.565 
> because of local repeters.
>  
> We are preparing to order three additional units for a February  build.  That 
> will give one for a homing beacon and two spare units should  there be a 
> transmitter problem.
>  
> Question - What frequency should we use for the existing and new  units.  
> What frequency for the homing beacon?

The homing beacon should be at least 200 kHz from the hunt transmitters 
to accommodate some of the less selective European ARDF receivers.

According to 
http://www.txvhffm.com/index.php?option=com_content&task=view&id=34

145.565 is simplex, 145.02 is packet.  If there's a local uncoordinated 
repeater close to 145.565, perhaps another frequency in the simplex band 
between 145.5 and 145.8 could be used for the homing beacon.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV